View MTF-TQ57SN741-AV_1624359.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 1 / 28 liquid crystal display module model: MTF-TQ57SN741-AV customer?s no.: acceptance microtips technology inc. 12f. no.31 lane 169, kang ning st., his-chih, taipei hsien, taiwan fax: 886-2-26958625 approved and checked by approved by checked by made by ? 2008/01/17 ? B 2008/01/17 ? 2008/01/17 ? ? 2008/01/17
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 2 / 28 revise records rev. date contents written approved a 2007/12/14 specification released sherry chen steele lee b 2008/01/17 see note 1 sherry chen steele lee special notes note1. del 8080 8bit interface timing (write cycle) and 8080 8bit interface timing (read cycle) (page15~16) note2. note3. note4. note5.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 3 / 28 contents 1. general description and features ..........................................................................4 1.1 features ..........................................................................................................................4 1.2 general specifications ..................................................................................................4 2. input terminal pin assignment .................................................................................5 2.1 pin assignment ..............................................................................................................5 2.2 back-light unit (blu) .....................................................................................................5 3. block diagram ..................................................................................................................6 4. optical characteristics ...............................................................................................7 5. absolute maximum ratings ......................................................................................10 5.1 absolute ratings of environment ...............................................................................10 5.2 electrical absolute maximum rating .........................................................................11 6. 8080 indirect addressing mode ..............................................................................12 6.1 8080 16 bit interface timing (write cycle) ................................................................12 6.2 8080 16 bit interface timing (read cycle) .................................................................13 6.3 8080 indirect interface timing ...................................................................................14 7. electrical characteristics ........................................................................................15 7.1 dc electrical characteristics .......................................................................................15 8. backlight specifications ...........................................................................................16 9. displayed color and input data ...........................................................................17 10. quality standard for lcd .........................................................................................18 10.1 objective ......................................................................................................................18 10.2 scope ............................................................................................................................18 10.3 inspection specification ..............................................................................................20 11. reliability condition ...................................................................................................23 12. precautions ......................................................................................................................24 12.1 operation .....................................................................................................................24 12.2 safety ............................................................................................................................24 12.3 handling .......................................................................................................................24 12.4 static electricity ............................................................................................................26 12.5 storage .........................................................................................................................26 12.6 cleaning .......................................................................................................................26 12.7 waste ............................................................................................................................26 13. warranty ............................................................................................................................27 14. dimensional outlines .................................................................................................27
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 4 / 28 1. general description and features MTF-TQ57SN741-AV is a tm (transmissi ve) type color active matrix tf t (thin film transistor) liquid crystal display (lcd) that uses am orphous silicon tft as a switching device. this model is composed of a tft-lcd module, a driver circuit and a back- light unit. the resolution of a 5.7" contains 320rgb240 dots and can display up to 262k colors. the following ta ble described the features of MTF-TQ57SN741-AV. 1.1 features - transmissive type with led back-light. - tn (twisted nematic) mode. -- backlight-driving dc/ac inverter is not built in this module. 1.2 general specifications item specification unit screen size 5.7 inches diagonal -- display resolution 320 x rgb x 240 dot pixel pitch 0.36 (h) 0.36 (v) mm active area 115.2 (w) x 86.4 (h) mm outline dimension 144.0 (w) x 104.6 (h) x 12.8 (t), without fpcb tail. mm 155g (MTF-TQ57SN741-AV) weight 202g (mtf-tq57sp741-av) -- display mode normally white/ transmissive/wide view -- pixel arrangement rgb-vertical stripe -- surface treatment non-glare (3h) -- viewing direction 6 o?clock -- input interface 16-bit high-speed bus in terface (intel 80 series) -- color garmut ntsc 58% --
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 5 / 28 2. input terminal pin assignment 2.1 pin assignment pin no. symbol i/o function remark 1 gnd i gnd -- 2 v dd -- 3.3v power supply -- 3 wr# i vram write signal -- 4 rd# i vram read signal -- 5 cs# i chip select -- 6 nc -- no connection -- 7 rest# i reset -- 8 d/c# i register select signal; h: data, low: command -- 9 db15 i display data -- 10 db14 i display data -- 11 db13 i display data -- 12 db12 -- display data -- 13 db11 i display data -- 14 db10 i display data -- 15 db9 i display data -- 16 db8 i display data -- 17 db7 i display data -- 18 db6 i display data -- 19 db5 -- display data -- 20 db4 i display data -- 21 db3 i display data -- 22 db2 i display data -- 23 db1 i display data -- 24 db0 i display data -- 25 v dd -- 3.3v power supply -- 26 gnd -- gnd -- 2.2 back-light unit (blu) pin no. symbol function remark 1 leda power supply for led backlight -- 2 ledk gnd for led backlight --
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 6 / 28 3. block diagram connection with host timing controller with memor y gate driver dc/dc converter source driver gate driver 5.7? tft lcd panel ncs y1 rs nwr nrd data bus nreset g240 y960 g1 vdd(3.0~3.6v)
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 7 / 28 4. optical characteristics the following items are measured under stable co nditions. the optical characteristics should be measured in a dark room or equivalent state with the methods shown in note (1). measuring equipment: lcd-5000, bm -5a, bm-7, pr-650, ez-contrast (ta=25c , i f =300ma) item symbol condition min type max unit note mtf- tq57sn741- av -- 500 -- cd/m 2 brightness mtf- tq57sp741-av br 300ma/6.6v -- 400 -- cd/m 2 note 1 t r -- 15 20 ms response time t f =0 -- 35 50 ms note 2 contrast ratio cr at optimized viewing angle 150 250 -- -- note 3 r x 0.610 0.640 0670 red r y 0.314 0.344 0.374 -- g x 0.268 0.298 0.328 green g y 0.553 0.583 0.613 -- b x 0.107 0.137 0.167 blue b y 0.139 0.159 0.179 -- wx 0.282 0.312 0.342 color chromaticity white wy =0 normal viewing angle 0.319 0.349 0.379 -- -- r -- 65 -- hor. l -- 65 -- b -- 50 -- viewing angle (6h) ver. f cr 10 -- 65 -- degree note 4 led life time 25 c ll i f =300ma v f =6.6v -- 50k -- hours note 5 note 1 : test equipment setup after stabilizing and leaving the panel alon e at a given temperature for 30 min., the measurement should be execute d. measurement should be ex ecuted in a stable, windless, and dark room, 30 min. after turning the back light on. this should be measured in the center of screen. back-light current: 300ma environment condition: 1. ta=25 2 c 2. illuminations Q 1 lux
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 8 / 28 lcd panel photodetecor tft - lcd module the center of the screen field bm-5a : 50cm bm-7 50cm pr-650 : 50cm photodetecor field pr-650 1 o bm-5a bm-7 1 o 1 o note 2 : definition of response time: tr and tf the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. note 3 : definition of contrast ratio: brightness measured when lcd is at ?white state? contrast ratio (cr) = brightness measured when lcd is at ?black state? note 4 : measured at the center area of the pane l when all the input terminals of lcd panel are electrically opened. tr t f 100 90 10 0 % optical res p onse white black white
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 9 / 28 view angle l r normal line = 0 6 o'clock f = 27 0 3 o'clock r = 0 9 o'clock l = 180 12 o'clock = 90 : viewing angle : viewing direction f note 5 : this is the reference value. the white-led li fe time is defined as a time when brightness not to become under 50% of the original value (at ta=25 c)
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 10 / 28 5. absolute maximum ratings 5.1 absolute ratings of environment if the operating condition ex ceeds the following absolute maximum ratings, the tft lcd module may be damaged permanently. (ta=25c, v ss =gnd=0) item symbol min. max. unit note storage temperature t stg -30 80 c (1) operating temperature (ambient temperature) t opr -20 70 c (1), (2) note (1) 95 % rh max. ( 40 c ta ) maximum wet-bulb temperature at 39 c or less. (ta > 40 c) no condensation. (2) in case of below 0, the response time of liquid crystal (lc) becomes slower and the color of panel becomes darker than normal one. level of retardation depends on temperature, because of lc's character
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 11 / 28 5.2 electrical absolute maximum rating (ta=25c, v ss =gnd=0) parameter symbol min. typ. max. unit remark power supply voltage v dd -0.3 -- +7.0 v note 1 permissive input ripple voltage v rf -- -- 100 mvp-p v dd = +3.3v input voltage (low) v il 0 -- 0.3 v dd v input voltage (high) v ih 0.7 v dd -- +5.5 v note 2 input current (low) i ol1 -- -- 10 a v i =0v, note 2 i oh1 -- -- 10 a v i =3.3 5.0v, note 3 input current (high) i oh2 -- -- 100 a v i =3.3 5.0v, note 4 note1: v dd -turn-on conditions 0 < t1 20ms 0 < t2 50ms 0 < t3 1s 3.0v 3.0v 0.3v v cc data t1 t2 t3 v dd -dip conditions v dd -dip conditions should also follow the v dd -turn-on conditions td 20ms v cc td 2.4v 3.0v note2: clk, r0~r5, g0~g5, b0~b 5, hsync, vsync, de, r/l, u/d note3: clk, r0~r5, g0~g5, b0 ~b5, hsync, vsync, r/l, u/d note4: de
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 12 / 28 6. 8080 indirect addressing mode 6.1 8080 16 bit interface timing (write cycle)
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 13 / 28 6.2 8080 16 bit interface timing (read cycle)
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 14 / 28 6.3 8080 indirect interface timing
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 15 / 28 7. electrical characteristics 7.1 dc electrical characteristics (ta=25 2c, v ss =gnd=0) item symbol min. typ. max. unit remark supply voltage v dd 3.0 3.3 3.6 v -- supply current i dd 89 85 82 ma note 1 l level v ih 0.7 v dd -- v dd v -- input voltage for logic h level v il 0 -- 0.3 v dd v -- note1: fv =60hz , ta=25c , display pattern : all black
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 16 / 28 8. backlight specifications 8.1 absolute maximum ratings ta=25 c item symbol maximum rating unit note peak forward current i fm 450 ma (1) reverse voltage v r 10 v -- power dissipation p d 3300 mw -- operating temperature t op -20~70 -- storage temperature t st -30~80 -- note (1): permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded. functional operation should be restricted to the conditions described under normal operating conditions. 8.2 electrical/operating characteristics ta = 25 c parameter symbol min. typ. max. units t est condition forward voltage v f -- 6.6 -- v led current i f -- 300 -- ma uniformity* -- 75 -- -- % x 0.26 0.29 0.32 -- chromaticity coordinates y 0.26 0.29 0.32 ---- ta=25 if=300ma *: uniformity = (min./max.) x 100%
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 17 / 28 9. displayed color and input data data signal color & gray scale r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(0) 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 green(0) 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 blue(0) 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 cyan 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 magenta 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 yellow 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 basic color white 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(62) 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 red(61) 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 : : : : : : : : : : : : : : : : : : : red(31) 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 : : : : : : : : : : : : : : : : : : : red(1) 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 red red(0) 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 green(62) 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 green(61) 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 : : : : : : : : : : : : : : : : : : : green(31) 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 : : : : : : : : : : : : : : : : : : : green(1) 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 green green(0) 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 black 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue(62) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 blue(61) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : : blue(31) 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : blue(1) 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 blue blue(0) 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 : low level voltage, 1 :high level voltage each basic color can be displayed in 64 gray scales from 6 bit data signals. with the combination of total 18 bit data signals, the 262,144-color disp lay can be achieved on the screen.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 18 / 28 10. quality standard for lcd 10.1 objective this specification book is the standard for lc d module general inspection. and also this book will be refer to customer approval specification. 10.2 scope this specification book is applicable to general lcd module. if supplier has any doubt or requirement, then it can be discussed. 10.2.1 acceptable quality level i nspection s ampling p rocedures a.q.l major mil-std-105e inspection level ii normal inspection single sample inspection 1 minor mil-std-105e inspection level ii normal inspection single sample inspection 1.5 major defect : a major defect is a defect that could result in failure or extremely reduction on the usability of the product for its intended purpose. minor defect : a minor defect is one that does not materia lly reduce the usability of the product for its intended purple or is a departure from establis hed standards giving no significant bearing on the effective use or operation of the unit. 10.2.2 inspection conditions 10.2.2.1 the environmental conditions for inspection shall be as follows - room temperature : 2510c - humidity temperature : 4520%rh 10.2.3 the external visual inspection - the inspection shall be performed by using 40watts fluorescent lamp for illumination and the distance between lcd and eyes of th e inspector shall be 30cm or more.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 19 / 28 10.2.4 inspection item pinhole, bright spot, black spot, white spot, black line, white line, foreign particle, bubble the color of a small area is different from the remainder. the phenomenon dose not change with voltage. contrast variation the color of a small area is different from the remainder. the phenomenon change with voltage. glass defect glass crack, chip operating function, contrast, uniformity, components 10.2.5 definition of the area b b a a r r e e a a a area a area: viewing area b area: out of viewing area
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 20 / 28 10.3 inspection specification 10.3.1 non-operating inspection specification acceptable q?ty class of defects no. inspection item criteria of defects zone a zone b 1. circuit short major 1 circuits 2. circuit open 0 0 a 0.3 ignore b 0.3 < 0.4 4 c 0.4 < 0.5 2 d 0.5 < 0 total defect point (b,c) 4 ignore 2 black spot, white spot, bright spot, foreign particle * reject when 5 or more spots are gathered within 5mm circle. a w 0.02 - * b 0.02 < w 0.05 l 5 2 c 0.05 < w 0.1 l 3 2 d 0.1 < w - 0 total defect point (b,c) 3 ignore 3 black line, white line * reject when 5 or more spots are gathered within 5mm circle. a ?Q 0.3 ignore b 0.3 < ?Q 0.4 4 c 0.4 < ?Q 0.5 2 d 0.5 < 0 ignore 4 contrast variation total defect point (b,c) 4 1. pin hole a ?Q 0.15 ignore b 0.15 < ?Q 0.2 2 (*) 0.2 < 0 ignore * two pin hole shall not formed in the single dot 2. excess, void a a Q 0.2 & b Q 0.2 ignore minor 5 = (a+b)/2 b 0.2 < a or 0.2 < b0 ignore a b = ( a+b )/ 2 a b = (a+b)/2 b a b a b a w l
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 21 / 28 a bright dot n Q 2 b dark dot n Q 3 c total bright & dark dots n Q 4 ignore 6 dot defect * this inspection item does not apply to b/w lcd a ?Q 0.3 ignore b 0.3 < ?Q 0.5 2 7 bubble between polarizer and panel c 0.5 < 0 ignore circular : same as inspection item no.2 8 polarizer scratch and particle linear : same as inspection item no.3 ignore a ?Q 0.2 ignore b 0.2 < ?Q 0.3 4 c 0.3 < ?Q 0.5 2 d 0.5 < 0 ignore 9 polarizer dent total defect point (b,c) 3 10 bubble in the cell any size 0 0 11 dirt on polarizer dirt which can be wiped easily should be accepted. 12 protection film the protection film should not be stripped up to viewing area and the peeled off angle should not exceed 20 degrees. 13 polarizer shift 1. shifting in position should not exceed the glass outline dimension. 2. incomplete covering of the viewing area due to shifting is not allowed. 3. shifting in position should be within the tolerance (refer to module dimensional drawing) 14 silicon 1. silicon must cover all circuits. 2. silicon thickness should be within specification (refer to module dimensional drawing) minor 15 tape 1. location: refer to specification. 2. insufficient adhesive. 16 tcp, fpc defect film or pattern should not have crack. major 17 components missing co mponents not allowed.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 22 / 28 class of defects no. inspection item criteria of defects 1 no display -- 2 abnormal operation -- 3 contrast defect judge according to module specification. establish boundary sample if required. 4 viewing angle defect judge according to module specification. establish boundary sample if required. 5 excess power consumption judge a ccording to module specification. 6 back-light, led defect 1. no lit-on 2. different color 3. low brightness major 7 speaker, vibrator defect 1. no operation 2. abnormal operation 8 cross-talk defect no noticeable crosstalk. establish boundary sample if required. 9 uneven brightness no noticeable unevenness allowed. establish boundary sample if required. 10 uneven color no noticeable unevenness allowed. establish boundary sample if required. minor 11 spot, pinhole, foreign particle, line same as in chapter 7.1
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 23 / 28 11. reliability condition 11.1 lcm reliability test no. parameter condition 1 high temperature operating 70 c 2 c, 240 hrs (operation state) 2 low temperature operating -20 c 2 c, 240 hrs (operation state) 3 high temperature storage 80 c 2 c, 240 hrs 4 low temperature storage -30 c 2 c, 240 hrs 5 damp proof test 40 c 2 c, 90 95%, 96hrs 6 vibration test total fixed amplitude: 1.5mm vibration frequency: 10 55hz one cycle 60 seconds to 3 direction of x, y, z each 15 minutes. 7 shock test to be measured after dropping from 60cm high on the concrete surface in packing state. notes: 1. no dew condensation to be observed. 2. the function test shall be conducted after 4 hours storag e at the normal temperature and humidity after removed from the test chamber. 3. vibration test will be conducted to the pro duct itself without putting i in a container. dropping method corner dropping a corner: once edge dropping b, c, d edge: once face dropping e, f, g face: once a b e g d c f 60cm concrete surface
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 24 / 28 12. precautions 12.1 operation burn-in sometimes happens when the same charac ter was displayed at along time. therefore, to prevent burn-in, it is recommended to set up a screen-saver function. 12.2 safety the liquid crystal in the lcd is poisonous, do not put it in your mouth. if the liquid crystal touches your skin or clothes, wash it off immediately using soap and water. 12.3 handling a. the lcd module shall be installed flat, without twisting or bending. b. cof or fpc has narrow pattern width, so easily become open circuit by external force. do not apply pressure to cof or fpc especially in bending area. c. to avoid damage in appearance or malfunction, do not subject the module to mechanical shock or to excessive force on its surface. d. the polarizer attached to the display is very easy to be damaged, handle it with care to avoid scratching. e. to avoid contaminat ion on the display surface, do not touch the display surface with bare hands. f. provide a space so that the lcd module does not come into contact with other components.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 25 / 28 g. to protect the lcd panel from external pressure, put covering gl ass (acrylic board or similar board) to keep appropriate space between them. h. be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. i. property of semiconductor devices may be affected when they are exposed to light possibly resulting in malfunctioning of the ics. to prevent such malfunctioning of the ics, your design and mounting layout done are so that the ic is not exposed to light in actual use. j. strong light exposure causes degradation of color filter. it may not recover k. do not contact with water to avoid metal corrosion. l. when it is not in use, the screen must be turned off or the pattern must be frequently changed by a screen saver. if it displays the same pattern for a long period of time, brightness down/image sticking may develop due to the lcd structure. m. never disassemble lcd product under any circumstances. if unqualified operators or users assemble the product after disassembling it, it may not function or its operation may be seriously affected.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 26 / 28 12.4 static electricity since a module is composed of electronic circuits, it is not strong to electrostatic discharge. a. the lcd module shall be installed flat, without twisting or bending. ground soldering iron tips, t ools and testers when they operate. b. ground your body when handling the products. c. do not apply voltage to the input terminal without applying power supply. d. do not apply voltage that exceeds the absolute maximum rating. e. store the products in an anti-electrostatic container. f. peel off protect tape, attached to polarizer, slowly to minimize esd damage. 12.5 storage store the products in a dark place at +5 ~ +25 degree c, low humidity (50%rh or less). do not store the products in an atmosphere containing organic solven ts or corrosive gases. 12.6 cleaning a. do not wipe the polarizer with dry cloth, as it might cause scratch. b. wipe the polarizer with a soft cloth soaked with petroleum ipa, other chemical might damage. 12.7 waste when dispose of lcd module, manage it at the production waste according to the relevant laws and regulations.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 27 / 28 13. warranty this product has been manufactured to your comp any?s specifications as a part for use in your company?s general electronic pro ducts. it is guaranteed to perform according to delivery specifications. for any other use apart from general electronic equipment, we cannot take responsibility if the product is used in medical devices, nuclear po wer control equipment, aerospace equipment, fire and security systems, or any other a pplications in which there is a direct risk to human life and where extremely high levels of reliability ar e required. if the product is to be used in any of the above applications, we will need to enter into a separate product liability agreement. 1 we cannot accept responsibility for any defect, which may arise from additional manufacturing of the product (including disassembly an d reassembly), after product delivery. 2 we cannot accept responsibility for any defect, wh ich may arise after the application of strong external force to the product. 3 we cannot accept responsibility for any defect, wh ich may arise due to the application of static electricity after the product has passed your company?s acceptance inspection procedures. 4 we cannot accept responsibility fo r industrial property, which may arise through the use of your product, with exception to those issues relati ng directly to the structure or method of manufacturing of our product. microtips-origin lo nger than one year from microtips production. 14. dimensional outlines see next page??.
messrs. rev. no. issued date. page. product specification model: MTF-TQ57SN741-AV b jan.17, 08 28 / 28 .

▲Up To Search▲

Price & Availability of MTF-TQ57SN741-AV

	To Download MTF-TQ57SN741-AV Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .